SWICO Watch Service Centre

Free Postage & Estimates
The ONLY UK After Sales Service Centre for...
  • RAYMOND WEIL
  • 88 RUE DU RHONE
  • Eternal Silver
  • TW Steel
  • Paul Smith Watches
  • BOSS Watches
  • BOSS Orange Watches
  • Coach Watches
  • Juicy Couture Timepieces
  • Lacoste Watches
  • Movado Watches
  • Scuderia ferrari Watches
  • Tommy Hilfiger Watches
authorised to carry out warranty claims free of charge.
What a Battery Replacement and Service involves


Quartz Watches

RECOMMENDATION: BATTERY REPLACEMENT 

If possible batteries should be replaced every eighteen months or when the watch starts to lose time. To protect the moment, spent batteries must not be left as they may leak and damage the movement, necessitating a full service.

BATTERY REPLACEMENT

To carry out a Battery replacement/mini service our watchmakers will:

  1. Remove the quartz movement from case.
  2. Remove the spent/dead cell/battery.
  3. Clean the contacts on the circuits
  4. Fit a new cell/battery.
  5. Check the electronics using various testing apparatus.
  6. Clean the case and bracelet in an ultrasonic tank using non corrosive liquid.
  7. Dry and vacuum the case.
  8. Refit the movement.
  9. Replace all faulty or worn seals.
  10. Reseal the watch and check in special apparatus for water resistancy.*
  11. Test the watch for 24 hours.

* Applicable only to water resistant models


NB: Replenishing the cell/battery may not guarantee the future performance of the watch.  Please refer our service recommendation for quartz watches. A full-service is a lot more intricate and guaranteed for 2 years. A battery replacement does not come with a guarantee.

 

RECOMMENDATIONS: QUARTZ WATCHES

To ensure the longevity of your time piece we recommend that Quartz Watches are serviced every 2 ½ to 3 years. This period, of course, varies considerably from wearer to wearer.

FULL SERVICE

This is the procedure our watchmakers will perform when carrying out a service:

  1. Remove the quartz movement from the case.
  2. Remove the dial and hands from the movement and inspect for damage.
  3. Strip the movement, separating electronic and mechanical parts.
  4. Clean the mechanical parts in ultrasonic an machine.
  5. Check the mechanical parts for wear and replace where necessary.
  6. Reassemble and lubricate all mechanical parts.
  7. Check electronics and replace faulty parts where necessary.
  8. Reassemble the complete movement and fit new cell/battery.
  9. Inspect reassembled movement.
  10. Refit the dial and hands.
  11. Clean case in the ultrasonic tank using a non-corrosive solution.
  12. Air vacuum case to remove any residue.
  13. Refit movement, dial and hands into case - replace seals where necessary.
  14. Timepiece checked in special apparatus for water resistance.
  15. Test the movement on timing machine for accuracy.
  16. Finally inspect watch after 48 hours.
Our Full-Service is guaranteed for 2 years. 



Mechanical/Automatic Watches

RECOMMENDATIONS: AUTOMATIC WATCHES

The use of Automatic Watches

Automatic Chronograph/Chronometer

This watch movement is wound by the active movement of the wearer’s wrist.

An automatic watch should be worn ‘actively’ and continuously for at least 12 hours a day.

If the wearer is inactive or takes the watch off regularly the reserve will start to run down and eventually the watch will start to lose time and stop.

What to do if an automatic watch starts to lose time?

Remove the watch from the wrist and wind it carefully between six and ten times depending on usage i.e. more winds for less wear.

To ensure the longevity of your time piece we recommend that mechanical/automatic watches are serviced every 2 years.  This period, of course, varies considerably from wearer to wearer.


AUTOMATIC/MECHANICAL WATCHES.

This is the procedure our watchmakers will perform when carrying out a service on a automatic/mechanical watch:

  1. Remove the movement from case.
  2. Remove the dial and hands from the movement and inspect for damage.
  3. Disassemble the movement and check the mechanical parts.
  4. Clean the parts in an ultrasonic machine.
  5. Check all mechanical parts for wear and replace where necessary.
  6. Reassemble the movement and lubricate mechanical parts.
  7. Check the balance wheel and hair spring.
  8. Check the accuracy of the movement on a timing machine. 
  9. Refit the dial and hands.
  10. Clean the case or case/bracelet in an ultrasonic tank.
  11. Fit a new glass when required or requested.
  12. Air vacuum the case to remove any residue.
  13. Refit the movement, dial and hands into the case.  
  14. Check seals and replace where necessary.
  15. Timepiece checked in special apparatus for water resistance.*
  16. Test watch once again on timing machine for accuracy.
  17. Automatic watches put on 24 hour electronic winding machine.
  18. Finally inspect after 48 hours.

* Applicable to water resistant models only


Our Full-Service is guaranteed for 2 years.


2
WE ASSESS YOUR WATCH AND EMAIL YOU
3
WE SERVICE YOUR WATCH & SEND IT BACK TO YOU
LOOKING FOR A
NEW WATCH?

SEE OUR
OUTLET MODELS